Kegland

New

KL25904

Introducing the Gen3 FermZilla Tr-Conical. Now with 3 Inch Tri-Clover ferrule molded into the tank and redesigned tri-clover dump valve.

Sold 0 items

฿4,990 ฿4,990
 
Out of stock

 

New

KL02646

These gas manifolds are rated to 100psi and include ball valves that screw into the aluminium extrusion with 1/4inch threads.

Sold 0 items

฿1,490 ฿1,490
 

 

New

KL02639

These gas manifolds are rated to 100psi and include ball valves that screw into the aluminium extrusion with 1/4inch threads.

Sold 0 items

฿1,290 ฿1,290
 
Out of stock

 

New

KL02622

These gas manifolds are rated to 100psi and include ball valves that screw into the aluminium extrusion with 1/4inch threads.

Sold 0 items

฿990 ฿990
 
Out of stock

 

New

KL02615

These gas manifolds are rated to 100psi and include ball valves that screw into the aluminium extrusion with 1/4inch threads.

Sold 1 items

฿790 ฿790
 

 

New

KL04497

This Camlock is the ideal attatchment for your homebrewery hoses (KL06873 Heavy Duty Silicone Hose 12.5x18.5mm). We highly recommend putting this onto the hose instead of the male versions as you can do this with one hand. If you had the female camlock on your brewing vessel you will need to hands to undo it because your other hand needs to pull the hose away.

Sold 2 items

฿290 ฿290
 

 

New

KL04503

The days are gone of quick disconnects and their propensity to leak, break and cause havok! Long live CAMLOCKS, after switching over to these you'll never look back. Sturdy 304 Stainless Steel design, and a super seal that will seriously stop anything from leaking out the side and causing a sticky mess. We recommend attaching the male fittings to your vessels and ball valves as it makes it a great deal easier removing hoses and other fittings with the female camlock.

Sold 2 items

฿190 ฿190
 

 

New

KB10537

his cap has been designed to be used with our PCO38 Tapping Head for the PET Mini Keg Range, with a specific pressure limit of 35psi / 2.5bar. As it is a standard PET bottle thread (PCO1881) it can also be used on the FermZilla Collection Container / Lid. Please Note: Never exceed the pressure capabilities of your vessel. PRV's are not spunding valves! Check out our blog article explaining this in further detail: Why you should never use a pressure relief valve as a spunding valve.

Sold 0 items

฿190 ฿190
 

 

New

KL15134

The Hop Missile can be used either as a Hop Back or an Inline Hop Infuser. The difference being flushing your wort through the Hop Missile back into the boiler, OR as a Hop Inline Infuser flushing the wort through the Hop Missile straight into your fermenter. Either way, you are going to have some serious fun getting a boost of aroma and flavour using this new method of hopping. For all you home hop growers, this is a must-have piece of kit to have to show off the best of your harvest.

Sold 0 items

฿4,290 ฿4,290
 

 

New

KL24334

his low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of the devices listed above. https://app.rapt.io/

Sold 0 items

฿1,290 ฿1,290
 

 

New

KL06293

Made from food grade silicone. Temperature Resistant to 180C. This is a replacement silicone elbow bend. This part joins the pump to the inlet on the base of the robobrew then to the outlet of the pump to the recirculation arm on the side of the Brewzilla

Sold 0 items

฿150 ฿150
 

 

New

KL32438

This is a replacement set of 4 adjustable stainless steel clamps to suit the Gen 4 100L BrewZilla only. It will not suit any other BrewZilla, DigiBoil or GrainFather unit.

Sold 0 items

฿190 ฿190
 
Out of stock

 

New

KL02936

These 15 Litre wash out kegs are the easiest way to clean out your beer lines AND your keg coupler. Simply fill your washout keg with a mixture of Star San and warm water. Attach your coupler like normal, and open your tap. We recommend letting the mixture sit in the lines for a minimum of 5 minutes. Then flush with water. Type A and D

Sold 0 items

฿4,290 ฿4,290
 
Out of stock

 

New

KB10897

"It's not how big it is. It's how you use it" Named purely on its looks and not its function. The Hop Bong is a versatile pressurizable tri-clover accessory, capable of not only dry hopping oxygen purged hops into fermenters. But also as an inline carbonation/oxygenation accessory. Capacity in Hop Pellets 150g to 180g

Sold 0 items

฿3,990 ฿3,990
 

 

New

KL02004

These compression fittings are the most common type to be used with immersion chillers on the market today. We highly recommend using these fittings on any and all immersion / ice bucket chillers to optimize the ability to quicky disconnect the liquid hosing for storage and ease of cleaning.

Sold 0 items

฿150 ฿150
 

 

New

KL06620

Stainless Angle / Elbow Male to Female 1/2 inch BSP

Sold 0 items

฿150 ฿150
 

 

New

KL14441

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

Sold 0 items

฿120 ฿120
 

 

New

KL01373

Need something to grab onto to pull a beer out of your new bright and shiny new NukaTap tap? Then it sounds like you need the shiny shiny NukaTap Chrome Plated Tap Handle.

Sold 1 items

฿190 ฿190
 

 

New

KL00888

Jazz up your Kegerator or commercial beverage dispensary with these stylish decal holders. Made from plated chrome plastic, with soft padding components as to not scratch your taps when attached are surely there to catch your eye. Our decal holders will fit any tap system! Their unique design as to clamp on, means you don't have to take off your tap to put these on. You will need a phillips head screw driver to remove the two screws. As the name says, this will fit a 82mm Diameter Decal/Sticker/Label.

Sold 0 items

฿190 ฿190
 

 

New

KL04084

Ideal for cutting hard metal like stainless steel pots and kegs. Drill lubricant should be used to avoid tempering the teel, high pressure and low RPM for best results.

Sold 0 items

฿290 ฿290
 

 

New

KL04107

Ideal for cutting hard metal like stainless steel pots and kegs. Drill lubricant should be used to avoid tempering the teel, high pressure and low RPM for best results.

Sold 0 items

฿290 ฿290
 
Out of stock

 

New

KL03643

If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.

Sold 0 items

฿290 ฿290
 
Out of stock

 

New

KL30366

This collection container fits all the FermZilla Tri-Conical with a 3 Inch x 3 Inch Butterfly Valve. No more threads oil removal tools to get this off, simply depressurise and remove the Tri-Clover fitting. We'd recommend placing a towel or upside down frisby to catch some drips.

Sold 0 items

฿590 ฿590
 

 

New

KL27731

This is a complete replacement silicone tubing kit for the pump and ball valve tubing on a 35L Gen 4 BrewZilla. Made from food grade silicone and temperature resistant to 180°C

Sold 0 items

฿490 ฿490
 

 

New

KL26680

Duotight Bottle Filler Beer Gun - Gen2 Have a keg of beer, but want to fill some bottles to take with you to the game, beach, or friend's house? The BeerGun is a great way to fill bottles from a keg. Every part that comes into contact with your beer is stainless steel. This unit features a CO2 purge, which helps to prevent oxidation during filling. These features, coupled with a CO2 jacketing tube for bottle purging and ergonomic valve actuators, makes filling bottles faster, intuitive, more accurate, and easier than ever! Because the Bottle Filler Beer Gun doesn't require a pressurizing stopper, you can fill a bottle of any depth without buying different stem lengths or adding plastic hose extensions. Includes: 1 x Bottle Filler Beer Gun Unit with gas and liquid trigger with silicone tip. Replacement Tips can be found here. 1 x 1/4" x 6.35mm duotight fitting 1 x Red Gas Carbonation Cap x 6.35mm Male duotight fitting (Connect your gas ball lock line directly to the unit, no longer a permanent fitting!) 1 x 1.5-2m Length of 4mm x 8mm EVABarrier Hosing 1 x 8mm Compression x 8mm female duotight fitting Elbow 1 x 8mm duotight x Yellow/Black liquid ball lock disconnect

Sold 1 items

฿1,490 ฿1,490
 

 

New

KB03529

Now updated with the all new duotight 8mm Ball Lock Disconnect (Grey+Red/Gas) This kit has been designed for simplicity and ease of putting together. This Kit Contains: 1 x KL15042 BlowTie Spunding Valve Gen 2 with 0-15psi Integrated Gauge 1 x KL20756 duotight 8mm (5/16") x Ball Lock Disconnect (Grey+ Red/Gas) 1 x KL18012 Rigid 8mm Plastic Joiner All new compact BlowTie Spunding Valve Gen2 Integrated Kit. If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.

Sold 8 items

฿950 ฿950
 

 

New

KL25898

Introducing the Gen3 FermZilla Tr-Conical. Now with 3 Inch Tri-Clover ferrule molded into the tank and redesigned tri-clover dump valve. This unit was born from customer feedback we received on the Gen2 Model. No more complicated dump valve designs here, just simplicity. Brew with confidence on the new Tri-Clover FermZilla Range.

Sold 12 items

฿3,390 ฿3,390
 

 

New

KL27458

The BrewZilla Gen 4 is designed to be a compact single vessel, double batch all grain home brewing system that can be run off a 15 amp socket. A complete turnkey system with a delay timing feature and step mash functionality. Built to make batches up to 60L, it is the next stepping stone up from the 35L BrewZilla model, being the ideal double batch system for those who want full control of their brew from start to finish.

Sold 4 items

฿22,990 ฿22,990
 

 

New

KL27434

The BrewZilla Gen 4 is designed to be a compact single vessel all grain home brewing system that can be run off a single 220-240v socket. A complete turnkey system with a delay timing feature and step mash functionality. Built to make batches up to 30L, it is the ideal solution for those who want to take the first step in all-grain brewing while also wanting full control of their batch from start to finish.

Sold 28 items

฿14,990 ฿14,990
 

 

New

KL20749

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean. The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured. This particular ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated duotight fitting the line will simply push directly into this fitting.

Sold 16 items

฿140 ฿140
 

 

New

KL01021

The Stout Spout has a removable creamer/aerator disc inside, it is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer. Simply un-screw the regular nozzle and screw on the Stout Spout and use as you would a stout tap.

Sold 3 items

฿290 ฿290
 

 

New

KL16285

Sold 1 items

฿690 ฿690
 

 

New

KL00253

Sold 0 items

฿590 ฿590
 

 

New

KL00246

Sold 4 items

฿790 ฿790
 
Out of stock

 

New

KL26468

Dimensions: 270mm Diameter 580mm High Feet are approximately at the 300mm Mark.

Sold 0 items

฿2,590 ฿2,590
 

 

New

KL26475

Dimensions: 350mm Diameter 600mm High Feet are approximately at the 310mm Mark. Dimensions of Standard Malt Pipe for G3: 350mm Diameter 405mm High

Sold 0 items

฿3,390 ฿3,390
 

 

New

KL26413

Sold 0 items

฿790 ฿790
 

 

New

KL10870

Need to set two different CO2 pressures for different beers on tap? Then you'll need two regulators to do it properly. With this MK4 Dual Pressure Regulator you'll be able to screw it into your CO2 bottle and fire away with two different pressures. No need to removing the High Pressure gauge off one regulator, buying an attachment and joining the two together. This new MK4 Model regulator has several advantages including: 1. Safer design with colour coded pressure release valves. 2. Easy mounting optoin 3. Optional extras such as gauge guard 4. Better body design and more reliable

Sold 0 items

฿2,690 ฿2,690
 

 

New

KL27717

Extra heavy-duty false bottom for the DigiBoil or BrewZilla. Filters and protects your brew/pump from large amounts of hops, adjuncts (orange peels, coriander seeds, etc. Designed exclusively for the 3 Vessel homebrewing market that wants to take full use of a 65L/17.1g DigiBoil to be used as a Mash Tun/Lauter Vessel. It can also be used on the BrewZilla Gen4 and 3.1.1 units if you wish to go down the maximum control with integrated pumps.

Sold 1 items

฿2,490 ฿2,490
 

 

New

KL26796

Sold 0 items

฿50 ฿50
 

 

New

KL26864

Sold 0 items

฿190 ฿190
 

 

New

KL20626

Sold 1 items

฿90 ฿90
 

 

New

KL20619

Sold 0 items

฿90 ฿90
 

 

New

KL20602

Sold 1 items

฿90 ฿90
 

 

New

KL26239

Sold 0 items

฿90 ฿90
 

 

New

KL04305

A must have tool for distillers parrots or in measuring cylinders. Know exactly what percentage of alcohol your distillate is coming out at.

Sold 2 items

฿290 ฿290
 

 

KB02665

แผงวงจร รุ่น 3.1.1 สำหรับคนที่ใช้หม้อรุ่นเก่าอยู่เช่น Robobrew สามารถเปลี่ยนมาอัฟเกรด เป็นรุ่น 3.1.1ได้ ใช้ได้ทั้ง ขนาด 35และ 65 ลิตร

Sold 0 items

฿990 ฿990
 

 

New

KL15059

Take the pain and risk away from drilling your own Temp Twister Ports and Thermowell for your FermZilla. We've done the tricky work for you! Does not include 1 x Red Gas Carbonation Cap 1 x Yellow Carbonation Cap 1 x Red 35psi OR 17psi Yellow Pressure Relief Valve (safety device) 1 x 60cm Thermowell Kit 1 x Temp Twister 1 x G20 Pump Up or G40 Pump Up/ 1 x FermZilla All Rounder or Conical Suits: 60L All Rounder FermZilla 55L Conical FermZilla 30L All Rounder FermZilla 30L Flat Bottom FermZilla (Not pressure rated) 27L Conical FermZilla

Sold 0 items

฿290 ฿290
 

 

New

KL22248

Ever wanted to punch out a few more litres of wort with your BrewZilla 65L? Maybe you wanted more strike water for a super sticky batch. Maybe you get boil overs a lot and would like a bit of extra protection. Now theres a solution! The all new 65L BrewZilla boiler extension that allows 24L headroom. Turn that 65L BrewZilla into a 89L behemoth!

Sold 0 items

฿1,990 ฿1,990
 

 

KL00994

สปริงสำหรับก๊อก NUKATAPเพื่อให้ปิดอัตโนมัติ

Sold 8 items

฿50 ฿50
 

 

Powered by MakeWebEasy.com
This website uses cookies for best user experience, to find out more you can go to our Privacy Policy  and  Cookies Policy